Introductory booklets
A series of brochures providing an introduction of product groups.

Introduction to PCD and PCBN Cutting Tool Materials
PCBN Cutting Tool Materials
Introduction to PCD Drilling Materials
Introduction to PCD and Synthetic Monocrystalline Diamond
Wire Drawing Die Blanks

Cutting tool and wire drawing die catalogue
Providing full details of the availability of PCD/PCBN and MONOCYRSTAL standard product range.

Leaflet
AMBORITE - Essentials of AMBORITE PCBN Tool Usage
A check-list of procedures and a series of useful tips when matching with AMBORITE.
   
Information leaflets: PCD/PCBN
A series of leaflets on PCD and PCBN products.
SYNDITE
SYNDAX3
SYNDIE/MONODIE
AMBORITE
DBA80
DBC50
  
Technical data leaflets: grits
As series of leaflets on  natural and synthetic diamond and ABN grit products.

PremaDia Diamond Abrasives - Wheel Sizes
SPC Diamond for Rotary Dressers
Diamond Abrasives for the Stone Industry
    - SDA Plus Series
    - SDB 1000 Series
    - DSN Series
Diamond Abrasives for Grinding Non- metallics
Diamond Abrasives for Electroplated Tools
Diamond Abrasives for Grinding Metals
ABN - Cubic Boron Nitride Abrasives
Micron Powders For Fine Surface Finishes
    
Grit product sheets
A series of single-page leaflets giving details of diamond and ABN abrasives.

Diamonds IN Industry/ Ultrahard Materials in Industry
Available in English only
A series of booklets comprising selected articles from
Industrial Diamond Review on specific applications of diamond tooling. 

Stone (56pp).
Glass (56 pp).
Ceramics (36 pp).
Plastics and Rubber (36 pp).
Building and Construction (56 pp).
Machining with Cutting Tools (40 pp).
Woodworking with SYNDITE (36 pp).
SYNDITE PCD Wear-Resistant Parts (12 pp).
Automotive Industry (34 pp).
Grinding Metals (68 pp).
Honing (40 pp).
    
Special publications
Properties of Diamond
Information on the properties of diamond under four main headings. General, Mechanical, Thermal and Optical and Electrical properties. Available in English, French, German and Italian. (8 pp).

Available in English only.
Diamond Grinding of Metals
This unique work of reference gathers together all the available data needed by workshop engineers to obtain maximum efficiency from diamond abrasive wheels.

The Measurement of Surface Finish
Sets out the basic principles of surface measurement, giving clear definitions of the terminology employed and describing the relative  importance of the various surface measurement parameters. (8 pp).
    
Videos
SYNDITE Cuts Metal (13 min).
SYNDITE Cuts Wood (16 min).
Abrasive Boron Nitride (20 min).
Stone - The Diamond Connection (20 min).
Construction - The Diamond Connection (20 min).
Diamond Wire Sawing (20 min).
Highway Grinding (5 min).
Wire Drawing with Diamonds (22 min).
Honing (20 min).
Truing and Dressing (15 min).
MICRON (18 min).
Diamond - A Singular Crystal (17 min).
MONODIE (11 min).
PCBN (13 min).
Grinding with PremaDia (15 min).
Diamond Saw Grits - The Right Choice (10 min).